Dr Detail - one-stop car care shop

Glass Polish Felt Tool, Bob

This is the most common tool supplied in glass polishing kits.  It can be drill mounted but will fit any drill chuck capable of accepting a 1/4" shaft or 1/4" collet. 

Use with Glass Polish Compound by spreading a little on the end surface of the bob and spreading it out on the glass before starting the polisher.  This will avoid slinging.  Keep a water spray bottle at hand to keep the past from drying out and flying away.  Polish until the mark is removed.  It is a little slow compared to paint polishing but will get the job done right.

TIP:  If the mark is linear get yourself a dark colored Crayon and slip inside the vehicle to trace the imperfection on the inside of the glass.  This will mark it's location as you polish it away so you can locate it.

CAUTION:  don't try to remove a deep scratch (one that catches your fingernail) or you may leave a distortion which is just as annoying, and/or weaken the glass and make it unsafe.

For a variation using a Rotary or DA buffer/polisher see the Glass Polish Felt Tool, Pad listing

Item #585

$9.95 USD